จำนวน 3 รายการ

เครื่องเจียร์ราบรุ่น HHT-3A 3060 และ รุ่นHHT-3A 3060 ASD

0 0

Model Identification:
  
CB -3A 3060 : Automatic longitudinal and cross feed with rapid vertical traverse.
  
CB - 3060 ASD : Automatic vertical feed is driven by a stepping motor . Once the set value for automatic grinding finished, grinding wheel stops feeding, then performs polishing, when polishing finished, table stops automatically and the grinding wheel returns to the home point.
   
MODEL

 

CB-3A3060

CB-3O6OASD

 

 Capacity

 

Table sizes

Longitudinal

Cross travel
Spindle center to table surface
Magnetic chuck sizes

300x650 mm

680 mm

320 mm
600 mm
300x600 mm

300x650 mm

680 mm

320 mm
600 mm

300x600 mm

 Longitudinal Feed

Manual travel

Automatic travel

Table traverse rate

750 mm

700 mm
5
~25 M/min

750 mm

700 mm
5
~25 M/min

 Cross Feed

Manual travel
Automatic travel
Automatic feed (variable)

Hand wheel per revolution

Hand wheel per graduation

*Micrometric adjustment per revolution *Micrometric adjustment per graduation

350 mm

310 mm
0.5
~ 10 mm

5 mm
0.02 mm
0.2 mm (optional)
0.001 mm (optional)

350 mm
310 mm
0.5
~10 mm

5 mm
0.02 mm
0.2 mm (optional)
0.001 mm (optional)

 

 Vertical Feed

 

Hand wheel per revolution
Hand wheel per graduation

Micrometric adjustment per revolution
Micrometric adjustment per graduation
Automatic feed (ASD)

1 mm

0.005 mm

0.2 mm

0.001 mm

-

1 mm

0.005 mm

0.2 mm

0.001 mm

0.001~0.099 mm

 Grinding Wheel

Grinding wheel sizes

Spindle speed (rpm)

355x50x127 mm

1720 (60HZ)/1425 (50HZ)

355x50x127 mm

1720 (60HZ)/1425 (50HZ)

 

 Motor


 

Spindle motor
Hydraulic motor
Cross feed drive

Vertical feed drive

7.5 hP

3 hP

1/ 5 hp
1/ 5 hp

7.5 hP
3 hP
1/ 5 hp
1/ 5 hp

 Weight
 

Net wet (Approx)

Gross weight (Approx)

2400 kgs
2650 kgs

2400 kgs
2650 kgs

 Packing Dimensions (LxWxH)

2240 x 2160 x 2240 mm

2240 x 2160 x 2240 mm

 Total Rated Horsepower

11 HP

11 HP

 *Above information are for reference only. The machine design, specifications  and construction are subject to change without prior notice.
 

Standard Equipment

1 Ball screw on cross feed.

2.Vertical feed micrometric adjustment device.

3.Adjustable demagnetizer.

4.Wheel and wheel flange.

5.Wheel extractor with wrench.

6.Wheel balancing stand with arbor

7.Diamond dresser and base.

8.Quartz work light.

9.Splash guard.

1O.Leveling screws with pads.

11. Lifting bolt.

12.Tool box with service tools

 
Option& Equipment

1 Fix type electro magnetic chuck.

2.Fine mesh electro magnetic chuck.

3.Automatic paper filter with coolant device.

4.Manual parallel dresser.

5.Roller type balancing stand.

6.Wheel flange.

7.Motor 1O HP.